Final Program
| Monday, 4 September |
|
| 16:00-20:00 | Welcome party with registration |
| 16:30-19:00 | RICE laboratories are open for visit |
| Tuesday, 5 September | |
| 8:45 - 9:00 | Conference opening |
| 9:00 - 10:00 | Keynote lecture |
| 10:00 - 10:30 | Coffee break |
| 10:30 - 12:30 | Session 1 (papers S1.1 - S1.5) |
| 12:30 - 13:30 | Lunch provided on site |
| 13:30 - 15:30 | Session 2 (papers S2.1 - S2.5) |
| 15:30 - 16:00 | Coffee break |
| 16:00 - 17:30 | Session 3 (papers S3.1 - S3.4) |
| 18:00 | Bus leaves the conference site to the brewery |
| 18:30 - 19:30 | Pilsner Urquell brewery tour |
| 19:30 - 22:30 | Dinner at Pilsner Urquell brewery |
| 22:30 | Bus leaves the brewery to the hotels |
| Wednesday, 6 September | |
| 9:00 - 10:00 | Keynote lecture |
| 10:00 - 10:30 | Coffee break |
| 10:30 - 12:30 | Session 4 (papers S4.1 - S4.5) |
| 12:30 - 13:30 | Lunch provided on site |
| 13:30 - 14:40 | Session 5 (papers S5.1 - S5.3) |
| 14:40 | Conference closing |
Sessions
The conference is single track with each session of 1 hour and 30 minutes for four oral presentations. To encourage discussion on the papers, we do not allocate exact time slots for each presentation. Time of presentation is 20-25 minutes for each paper. The authors are adviced to prepare talk of 15 minutes and mention not only advantages of their approach but also potential disadvantages/difficulties. If you are open with your problems, you may get good advices in the discussion.
|
# |
Authors |
Title |
Session |
|
18 |
Ferdinand Grimm, Zhenbin Zhang and Ralph Kennel |
Computationally Efficient Predictive Control of Three-Level NPC Converters with DC-Link Voltage Balancing: A Priori State Selection Approach |
S1.1 |
|
16 |
Wolfgang Falmbigl, Oliver König, Stefan Jakubek and Günter Prochart |
Predictive Pulse Pattern Control for a Synchronous Multiphase Buck Converter |
S1.2 |
|
13 |
Martin Votava, Tomas Glasberger, Vaclav Smidl and Zdenek Peroutka |
Improved Model Predictive Control with extended horizon for Dual Inverter with Real-Time Minimization of Converter Power Losses |
S1.3 |
|
23 |
Johan Raath, Toit Mouton and Tobias Geyer |
On the Micciancio-Voulgaris algorithm to solve the long-horizon direct MPC optimization problem |
S1.4 |
|
5 |
Marco Rivera, Sergio Toledo, Santiago Verne, Luca Tarisciotti and Patrick Wheeler |
Indirect Predictive Control Techniques for a Matrix Converter Operating at Fixed Switching Frequency |
S1.5 |
|
6 |
Zhaoxia Leng and Qingfeng Liu |
A Simple Model Predictive Control for Buck Converter Operating in CCM |
S2.1 |
|
25 |
Mohammad Mehreganfar and Alireza Davari |
Sensorless Predictive Control Method of Three-Phase AFE Rectifier with MRAS Observer for Robust Control |
S2.2 |
|
26 |
Mohammad Hosein Saeedinia and Alireza Davari |
Virtual Flux Model Predictive Direct Power Control (VF-MPDPC) of AFE Rectifier with New Current Prediction Method and Negative Sequence Elimination |
S2.3 |
|
14 |
Henk Huisman, Furkan Baskurt, Apostolos Bouloukos, Nico Baars and Elena Lomonova |
Optimal Trajectory Control of a Series-Resonant Inverter with a Non-Linear Resonant Inductor |
S2.4 |
|
4 |
Ali Montazeri, Oliver König and Gerd Griepentrog |
Investigating effects of delta-sigma modulation for current measurement on FCS-MPC of IM: Hardware In the Loop Results |
S2.5 |
|
22 |
Eyke Liegmann, Petros Karamanakos, Tobias Geyer, Toit Mouton and Ralph Kennel |
Long-Horizon Direct Model Predictive Control With Active Balancing of the Neutral Point Potential |
S3.1 |
|
30 |
Davide Da Rù, Mirko Polato and Silverio Bolognani |
Model-Free Predictive Current Control for a SynRM drive based on an effective update of measured current responses |
S3.2 |
|
20 |
Vaclav Macha, Vaclav Smidl and Zdenek Peroutka |
Implementation of Predictive Spectrum Control of a LC filter using ADMM |
S3.3 |
|
11 |
Md. Shakib Hasan, Ali E. Hafni and Ralph Kennel |
Position Control of an Electromagnetic Actuator using Model Predictive Control |
S3.4 |
|
24 |
Sören Hanke, Oliver Wallscheid and Joachim Böcker |
A Direct Model Predictive Torque Control Approach to Meet Torque and Loss Objectives Simultaneously in Permanent Magnet Synchronous Motor Applications |
S4.1 |
|
21 |
Vaclav Smidl, Lukas Adam and Zdenek Peroutka |
Time-Optimal Current Trajectory for Predictive Speed Control of PMSM Drive |
S4.2 |
|
12 |
Marek Fehér, Ondřej Straka and Václav Šmídl |
Constrained Time-Optimal Control of PMSM with Continuous Control Domain |
S4.3 |
|
31 |
Xiaoqing Yong and Matthias Preindl |
Homotopy Continuation Based Observer for Sensorless PMSM |
S4.4 |
|
3 |
Mohamed Abdelrahem, Hisham Eldeeb, Christoph Hackl and Ralph Kennel |
Simple and Robust Direct-Model Predictive Current Control Technique for PMSGs in Variable-Speed Wind Turbines |
S4.5 |
|
8 |
Christian Dirscherl and Christoph Hackl |
Model predictive current control with analytical solution and integral error feedback of doubly-fed induction generators with LC filter |
S5.1 |
|
17 |
Sebastian Wendel, Armin Dietz and Ralph Kennel |
FPGA based Finite-Set Model Predictive Current Control of Small PMSM Drives with efficient Resource Streaming |
S5.2 |
|
9 |
Oliver Wallscheid and Joachim Böcker |
Derating of Automotive Drive Systems Using Model Predictive Control |
S5.3 |
